Temperature requirements in transport
Definition and general information
Temperature requirements in logistics are specifications for the temperature range within which a product may be loaded, transported and unloaded so that it remains safe and usable. They define, for example, minimum and maximum temperatures, any heating or cooling required, and limits for heating media. They are based on the product's properties and, depending on the goods, on food law, the EU GDP Guidelines for medicinal products or the ADR.
Temperature requirements protect a product from solidifying, crystallising, polymerising or spoiling. Beyond product quality, temperature also affects the processes before and after transport: tank containers sometimes have to be preheated, and a product that has cooled down too much can only be pumped at its destination once it has been reheated. This can delay unloading and further processing.
Sources:
- European Union (2004) – Verordnung (EG) Nr. 852/2004 über Lebensmittelhygiene (in German; accessed 11 November 2026)
- European Commission (2013) – Leitlinien für die gute Vertriebspraxis von Humanarzneimitteln (2013/C 343/01) (in German; accessed 11 November 2026)
- UNECE (2024) – ADR 2025, Volumes I and II (ECE/TRANS/352) (accessed 11 November 2026)
- PHMSA, US Department of Transportation (2013) – Safety Advisory Guidance: Heating Rail Tank Cars To Prepare Hazardous Material for Unloading or Transloading (accessed 11 November 2026)
- CHEManager (2026) – Zentrales Aufheizterminal stärkt Versorgungssicherheit und Effizienz (in German; accessed 11 November 2026)
- CHEManager (2020) – Gefahrgüter: Sicherheitsfaktor Temperatur (in German; accessed 11 November 2026)
How do temperature requirements differ from temperature-controlled transport?
Temperature requirements define which temperature range applies to a product. Temperature-controlled transport puts these specifications into practice: vehicle, insulation, heating or cooling and monitoring ensure that the range is maintained throughout the entire journey. The requirements are therefore the prerequisite for planning and carrying out temperature-controlled transport.
What do temperature requirements include?
Temperature requirements consist of a few measurable data points. Which of them are needed depends on the product and the mode of transport.
- Transport temperature range: minimum and maximum temperature of the product during transit, sometimes differing by season. Example: frozen food −18 °C or colder; acrylic acid (GAA) 15 to 25 °C.
- Loading and unloading temperature: the temperature the product must have when it is handed over at the loading or unloading point. Example: a range specified by the consignee for unloading.
- Heating or cooling: whether, and with which settings, the load is heated or cooled during transit. Example: tank container with a heating and cooling system.
- Maximum contact or heating medium temperature: the highest temperature at the heated tank wall or in the heating medium (water, steam), so that the product does not overheat locally. Example: acrylic acid (GAA) – heating water no higher than 35 °C, no live steam.
- Control and emergency temperature: the highest temperature for safe carriage, and the temperature at which emergency procedures must be initiated (temperature-controlled dangerous goods only). Example: certain organic peroxides and self-reactive substances.
- Additional instructions: specifications without a fixed value. Example: “Protect from frost/extreme heat”.
The values are derived from the product's properties. Under REACH Annex II, subsection 7.2 of the safety data sheet must describe how to control the effects of temperature during storage, and subsection 9.1 must state the melting or freezing point. Manufacturers, shippers and sites also set specific transport values, for example in product specifications, industry guidelines or site rules.
What legal rules apply to temperature requirements in transport?
There is no single regulation that covers all goods. Which rules apply depends on the type of goods:
- Food – Regulation (EC) No 852/2004, Annex II, Chapter IV point 7 and Chapter IX point 5 (in German): Conveyances and containers must be able to keep foodstuffs at appropriate temperatures and allow these temperatures to be monitored. The cold chain must not be interrupted.
- Frozen food (Germany) – German Frozen Food Regulation (TLMV), Section 2 (in German): constantly −18 °C or colder; brief fluctuations of up to 3 °C are permitted during shipping.
- Medicinal products for human use – EU GDP Guidelines 2013/C 343/01, Chapters 9.1 and 9.2 (in German): Temperature conditions must remain within acceptable limits during transport, and the storage conditions stated by the manufacturer apply throughout. A risk assessment of delivery routes determines where temperature controls are needed.
- Temperature-controlled dangerous goods – ADR 2025, section 7.1.7 (in German): Applies to certain self-reactive substances (Class 4.1), organic peroxides (Class 5.2) and polymerizing substances. Control and emergency temperatures are derived from the SADT or SAPT (self-accelerating decomposition or polymerization temperature); two independent sensors measure the temperature, which is checked and recorded every 4 to 6 hours.
- Other chemicals – REACH Annex II (safety data sheet) (in German): Requirements mainly follow from the safety data sheet, the product specification and agreements between shipper, carrier and consignee.
Note: This overview lists selected regulations and is not exhaustive. Depending on the goods, transport route and country, further rules may apply; the version in force at the time is decisive (as of November 2026). It does not constitute legal advice.
Temperature requirements in heated chemical transport
Some liquid chemicals are transported heated in road tankers or tank containers because they solidify or crystallise at ambient temperature.
Acrylic acid is a case in point: it freezes at 13 °C, and the Best Practice Guidelines of the Cefic sector group EBAM specify a target range of 15 to 25 °C. Too much heat is just as risky, because local overheating can trigger exothermic polymerisation. The guidelines therefore prohibit live steam and limit the heating water to 35 °C.
Another example concerns cooling in the tank: measurements by the Hoyer Group on tank containers over one year and across several climate zones showed that products lose heat mainly in the lower part of the tank, regardless of container type and product. Better insulation and well-placed temperature sensors help to counter this.
For chemical transport, temperature requirements therefore cover not only the target range but also the heating method, the heating medium temperature and instructions on preheating.
Temperature requirements as master data
Temperature requirements rarely change and apply to many shipments. They are therefore part of master data in logistics. As structured data – fields with a numerical value, unit, validity period and reference object rather than free text – they can be transferred into transport planning, freight tenders and driver instructions and checked automatically.
What matters is where and when a requirement applies. The outside temperature influences how quickly a product cools down or warms up; in winter, heating may be needed that is not required in summer. Some requirements therefore depend only on the product, others on the loading point (such as its climate or heating infrastructure), the unloading point or the season. Without this assignment, data quality suffers.
Sources:
- Cefic/EBAM (2023) – Best Practice Guidelines for Heating Stations (accessed 11 November 2026)
- CHEManager (2020) – Gefahrgüter: Sicherheitsfaktor Temperatur (in German; accessed 11 November 2026)
- European Union (2020) – Verordnung (EU) 2020/878 zur Änderung von Anhang II der REACH-Verordnung (in German; accessed 11 November 2026)
Challenges with temperature requirements
Specifications spread across many documents
Temperature specifications are found in the safety data sheet, in product specifications, in site-specific rules such as minimum requirements for self-collection, and in emails. Because the safety data sheet does not set fixed transport values, the dispatcher has to bring the information together and follow up on contradictions.
Requirements depend on location and season
The same product may be loaded heated at one loading point (pick-up loaction) in winter but not at another; the consignee sets its own limits for unloading. Climate zone and outside temperature can affect the actual product temperature in the tank.
Information does not reach everyone involved
Carriers and drivers usually work without access to the shipper's systems. If a specification does not reach them, or is not understandable, they cannot comply with it.
No way to analyse requirements across all shipments
If temperature specifications exist only as free text in documents, emails or other sources, analysing them takes a great deal of effort. Temperature-controlled transport is more expensive than standard transport because of special equipment, additional energy for heating or cooling, and monitoring. Without analysis, it remains unclear where requirements are missing and where they cause unnecessary costs.
Sources:
- Evonik Industries (2021) – Mindestanforderungen für Selbstabholer (in German; accessed 11 November 2026)
- CHEManager (2020) – Gefahrgüter: Sicherheitsfaktor Temperatur (in German; accessed 11 November 2026)
- UNECE (2024) – ADR 2025, Volumes I and II (ECE/TRANS/352) (accessed 11 November 2026)
- C.H. Robinson (n.d.) – Preise für temperaturgeregelten Versand (in German; accessed 11 November 2026)
Loady's solution
Maintain temperature requirements centrally at product level
In Loady, temperature requirements are maintained as structured data in one central place. At product level, this includes the maximum contact temperature, the transport temperature range (if needed, for different periods of the year), whether temperature-controlled transport is required, and additional temperature requirements such as “Tank must be heated throughout the transport”. The article Temperature requirements in Loady explains how this works.
Maintain specific temperature requirements per loading/unloading point
For a specific loading point (pick-up location), additional requirements can be stored, for example to reflect the local climate: tank temperature at loading, loading temperature range, heating or cooling during transport with the appropriate settings, heating type (permanently installed or clip-on) and maximum heating medium temperature for water or steam. Consignees define the unloading temperature range and further instructions for their unloading point (delivery location).
The same information for all parties
With Loady2Share, all parties along the supply chain can view the requirements via a shared link, even without their own Loady account, and display them in their own language. Via standard APIs, the data flows into ERP, TMS and procurement systems such as SAP, Oracle, Transporeon or Coupa.
Analyse temperature requirements
Because the requirements are stored in Loady as structured data, it is possible to analyse for which products, loading points and unloading points temperature requirements exist. This shows where requirements are missing and where temperature-controlled transport may not be necessary at all.
Key benefit of Loady
Loady is the central data source for temperature requirements (single source of truth). Shippers, carriers, drivers and consignees therefore work with the same, up-to-date information. At the same time, the structured data forms the basis for analyses, for example to identify potential savings.
Related entries
- Master data in logistics
- Safety data sheet
- ADR
- Loading and unloading instructions
- Master Data Management (MDM)

